The SafeLoad Chemical Handling System was designed to stop operators climbing onto the back of vehicles while handling heavy jugs of chemicals.
Falling off the vehicles suffering a range of injuries; if handling heavy chemicals the risk of getting covered in dangerous chemicals was high; serious health and physical injuries.
We wanted to put a stop to that in the best way we knew how. The SafeLoad Chemical Handling System can be used to:
- Mix chemicals without any handling any toxic substances
- Reduce chemical wastage with accurate measuring
- Remain on the ground when transferring chemical to main spray tank
- Safely store chemicals
- Eliminate lifting heavy chemical tanks
- Mitigate slips and falls
The SafeLoad System is a automatic chemical mixing system, kept secure within a locker box / stowage. Always at operator level, with just the flick of a switch, pour the chemical or chemicals to the desired level, and then when ready, pull the valve to flush it into your main spray tank.
How to operate the SafeLoad System:
- Twist red valve to Fill & Measure.
- Select which drum of chemical you are after using the easy coloured coded tap. Open the tap towards you.
- Chemical will be sucked into tank.
- Fill to required level.
- Close tap.
- Repeat with other chemicals if required.
- Turn valve to Empty & Rinse.
- Open tap labelled Vent.
- Close vent when tank empty.C
- hemical will be sucked from mixing tank into main spray tank, ready for spraying.
Coupled with the overhead fill point, no operators should ever have to climb up onto the vehicle - ute or truck - again! Save time, save lost chemical and most importantly, build a culture of safety within your team.
